DOWNLOADS
Everything you need to dot the I’s and cross the T’s on your drone journey:
Configurator Downloads
Choose one of the download options below:
- RubiQ’s (1.0 & 1.5) with original vertical red and black bullet motor connectors: INAV configurator 1.6.2
- RubiQ’s (2.0) with horizontal yellow motor connectors and Q X7 radio controllers:
- RubiQ’s (2.0) with horizontal yellow motor connectors and X9 Lite radio controllers:
Updated: November 2, 2023
Droneology
Default Firmware File for Flight Controller
- RubiQ’s (1.0 & 1.5) with original vertical red and black bullet motor connectors: inav1.6.2_RUBIQ_04-03-2017.hex_.zip
- RubiQ’s (2.0) with newer horizontal yellow motor connectors: inav_1.9.1_RUBIF3_2.0_R_G_Golden.hex_.zip
RubiQ Configuration File for Taranis Radio Controller
- For X9D radio controllers: RUBiQ_FreeRider_Riot250R_ with sounds — For reflashing instructions, click here
- For Q X7 radio controllers: QX7_RubiQ_Freerider_Riot250R_ELF_2.2.2 — For reflashing instructions, click here
- For X9 Lite radio controllers: X9Lite_RubiQ_ELF_Sim_Riot — For reflashing instructions, contact support.
Pre-Flight Checklist
Camera Mount 3D Print File
Breaking a lot of camera mounts and have a 3D printer in your lab? Save the hassle of an order by printing your own with this file. We’re using 1.75mm TPU or ABS. You’ll have to hammer in the standoffs and punch out the back, but you’re drone engineers now — you’ve got this. And we’ve got you; call us or submit a ticket if you have questions.
Looking for something more substantial? Check out the latest aluminum camera bracket here.