RubiQ
  • Configuration
  • Troubleshooting
    • Beeps and Blinks
  • Downloads
  • Support
Select Page
  • Download INAV
  • Reset Configuration
  • Connect to INAV
  • Step 1. Bind the RX
  • Step 2. Verify RX Channels
  • Step 3a. Verify AUX Channels
  • Step 3b. Verify Failsafe
  • Step 4. Verify Switches
  • Step 5. Verify LEDs
  • Step 6. Verify Motor Rotation
  • Step 7. Calibrate ESCs
  • Step 8. Calibrate Accelerometer
  • Step 9. Set Magnetic Declination
  • Pre-Arming Check
  • Before Going Outside
  • Preflight Check
  • Flight Test
  • Post-Flight Inspection

RubiQ’s May 2018 – July 2020 = INAV verison 1.9.3

Use the sidebar on the left to navigate through each step of the Configuration process.

© 2025 PCS Edventures! All rights reserved.

Privacy Policy