Connect to INAV

What You Need :

RubiQ

Antenna

INAV

Micro USB Cable

WARNING! 
Remove props and attach the antenna before connecting to INAV.

  • INAV can be opened directly from the Google Chrome Apps menu by clicking the Apps waffle in the top left corner of the browser and clicking the INAV icon. INAV can also be accessed by entering chrome://apps in the search bar.
  • Connect RubiQ to your computer via the micro USB cable. Look for the port on the side of Rubi’s PCB.

    click to enlarge

  • Press the Connect button in the top right corner to connect to RubiQ. Then, navigate to the Configuration tab along the left-hand side of INAV.



Troubleshooting

1.If you have trouble connecting to INAV, make sure you have the USB cable connected to the port on the PCB and not the flight controller. If you’re still having issues, check to make sure the port dropbox in the top right is set to the correct option. The exact name of the port depends on the computer being used. Common names include USBtoUART and COM3. Click the Connect button to restart the connection process.

2. If your computer is not recognizing your board, you’ll need to download VCP drivers directly from the following links. Download the VCP zip file that matches your operating system and follow the installation directions below:

Windows 7 / 8 / 8.1 / 10: https://www.silabs.com/documents/public/software/CP210x_Windows_Drivers.zip

Mac OS X: https://www.silabs.com/documents/public/software/Mac_OSX_VCP_Driver.zip

Linux: https://www.silabs.com/documents/login/software/Linux-3-x-x-VCP-Driver-Source.zip

For Windows OS:

⋅ Right-click the file and select “extract all,” this will bring up a sub-menu asking you to select a destination for the extracted files.

⋅ Press the “extract” option at the bottom. From there a new file window will appear containing multiple files.

⋅ Select the application file called CP210xVCPInstaller_x64 for 64-bit operating systems. If you have a 32-bit operating system, please select the application file called CP210xVCPInstaller_x86. (To determine if your PC is utilizing a 32 or 64-bit operating system, open your Control Panel > System > and look for the line item System Type. This will dictate if you are using a 32 or 64-bit OS.)

⋅ Proceed through the onscreen prompts and various windows until the installation is complete.

For MAC OS X:

⋅ Double-click the file to begin unzipping the file. A new .DMG file will appear.

⋅ Double-click the .DMG file to begin the installation process.

⋅ Proceed through the onscreen prompts and various windows until the installation is complete.

Once you’ve downloaded, unzipped and installed the driver:

  • Restart INAV and unplug and plug RubiQ back into the computer.
  • The VCP driver facilitates the connection between RubiQ and your computer’s ports. It should auto-select the correct port once it has been downloaded.

3. If you are still unable to connect, please attempt a manual port selection.

  • This can be done by clicking on the drop-down menu in the upper right of INAV and selecting the “Manual Selection” option. From there, a new box will appear to the left that begins with “Port:”.
  • Enter /dev/tty.SLAB_USBtoUART.
  • Unplug and plug RubiQ back into the computer.
  • Click Connect in the upper right.

Still having trouble? Submit a help ticket here: http://rubiq.edventures.com/support/

Arrow
Arrow
PlayPause
Slider